| This is a high performance oil specifically designed for high rpm NA engines and turbo-charged engines operating in high temperature climates and severe driving conditions. Provides outstanding thermal stability and increased anti-wear protection in sport cars and high mileage cars. |
| |
| Product Name: |
JAYTEC RUNNER 10W-40 |
| Classification: |
ENGINE OIL |
| Type: |
PARTIALLY-SYNTHETIC |
| Application: |
GASOLINE & DIESEL ENGINES |
| Approvals: |
API SM/CF |
| SAE: |
10W-40 |
| Containers |
Packing |
Product Code |
| 1L steel |
1Lx12/case |
289831 |
| 4L steel |
4Lx6/case |
289834 |
|
| |
| Drain Intervals: |
10,000 km for cars with mileage under 80,000 km
8,000 km for cars with mileage over 80,000 km
5,000 km for cars with mileage over 120,000 km |
|
|
| Recommended for: |
☆high rpm NA-engines
☆large displacement NA-engines
☆turbo-engines |
| Brief Overview: |
| Runner 10W-40 is a high-performance partially-synthetic engine oil providing outstanding anti-wear protection in the vehicles with high rpm NA engines, large displacement NA engines, and turbo engines, travelling long distances at high speed or operating in high temperature climates.
|
| Runner 10W-40 provides the following benefits: |
- Offers an extended viscosity range alternative to the 10W-30-rated OEM oils, providing an excellent sport-spec oil for high performance turbo-charged/high rpm engines.
- Delivers superior thermal stability of a SAE 40 grade, providing enhanced high temperature protection in high rpm and turbo engines, operated in high temperature climates or severe driving environments.
- Provides a thicker oil film and increased anti-wear protection required in higher mileage vehicles.
- Reduces the sludge and deposits that conventional oils can leave behind.
- Engineered to suit both gasoline and diesel engines, Runner 10W-40 contains a premium package of diesel engine oil additives which considerably increase its cleaning characteristics, and provides better protection from oxidation and better anti-wear effect than gasoline-specialized engine oils. Superior cleaning characteristics that Runner 10W-40 offers become an advantage in the countries using gasoline with a high content of impurities.
|
| Runner 10W-40 is especially recommended for the drivers who: |
◆ Own a high rpm of turbo-charged Japanese of European vehicle and are looking for a high quality oil to deliver high performance and superior anti-wear protection.
◆ Want to buy a made-in-Japan SM/CF 10W-40 viscosity oil, but think that TRD Super Sports Pro SM/CF 10W-40 and other genuine oils are a bit too expensive for the budget.
◆ Travel long distances in a 10W-30-recommended vehicle at high speed, and are looking for a high quality oil with a performance reserve and increased thermal stability.
◆ Operate a 10W-30 recommended vehicle in high temperature climates or extreme driving conditions (such as off-road driving) where extra heat-resistance characteristics and performance reserve are required, and a looking for a tougher oil with extended viscosity range, increased thermal stability and enhanced protection for high rpm operation.
◆ Own a 10W-30-recommended vehicle that has gone the distance of 120,000 km, and are thinking about a “high-mileage” alternative with a thicker oil film and reinforced protection characteristics. |
| Avoid using 10W-40-rated oils in: |
× ultra fuel efficient cars requiring 0W-20 viscosity
× extremely cold driving environments (for winter use JAYTEC Pro Runner 0W-30/5W-40 or any 5W-30-rated JAYTEC oil) |
| Typical Chemical & Physical Properties |
| Appearance |
Amber Gold |
| Base Oil Content (max), % |
80 |
| Additive Content (min), % |
20 |
| Density (15℃), g/cm3 |
0.86 |
| Kinematic Viscosity @ 40℃, mm2/s (ASTM D445) |
99.55 |
| Kinematic Viscosity @ 100℃, mm2/ (ASTM D445) |
14.23 |
| Viscosity Index (ASTM D2270) |
153 |
| Cold Crank Simulator (ASTM D5293), cP |
6700 |
| Mini-Rotary Viscometer (ASTM D4684), cP |
26600 |
| Pour Point℃ (ASTM D92) |
-37.5 |
| Flash Point℃ (ASTM D92) |
230 |
| NOACK Volatility (ASTM D5800), mass % loss |
11.6 |
| High Shear Rate Viscosity (ASTM D4683), cP@ 150℃ |
3.80 |
| TAN, mgKOH/g |
1.85 |
| TBN (HCl), mgKOH/g |
7.40 |
| Color (ASTM) |
L4.5 |
| Note: The specifications may be changed without notice |
|
